Splitter three-way plug waterproof connector

Splitter Three-Way Plug Waterproof Connector

Waterproof Connector from a single kind of development to now a variety of connection methods, constantly adapt to a variety of equipment terminals and a variety of outdoor waterproof solutions, connector is also connected to the electrical circuit of the electronic components, in electronic equipment is an indispensable part, and waterproof Circular Connector in our electronic engineering technology is often used parts, So what does the round waterproof connector do? In fact, the role of the fast connector is very simple: it is to block or isolate the circuit in the circuit between the link, set up a bridge of communication, so that the circuit circulation, so that it is effective in accordance with the intended function.

As the application environment changes, the connector derived a number of connection methods, the purpose is to better adapt to the field environment, to ensure the stable transmission of signals.

1. Threaded connection: This is the traditional connection mode, the advantage of this connection form is the use of strong reliability, through the nut gear friction to fix the cable, if coupled with prevent loose fuse effect will be better. The disadvantage is that the speed of disassembly is relatively slow, to a little electrical thread withdrawal, very time consuming.

2. Plug and pull connection: This is a common connection, the connector plug, socket connection and separation can be realized by moving in the horizontal direction, do not need to twist and select, only need a very short time to complete the connection and separation. The common plug and pull connection has ball and pin two kinds of structure. This connection eliminates the need for a traditional mechanical locking mechanism, so it is difficult to unplug a connector once it is inserted by mistake.

3. Tin welding connection: refers to the formation of continuous metal between the solder material and the welded surface. So the premise for a connector is to be solderable. Common coatings on welded ends of connectors include tin alloy, silver and gold. Spring type contact on the common welding end of the weld type, punch welding type and notch welding type: pinhole type contact on the common welding end of the hole arc notch.

4. Screw-free connection: This is now a popular connection form that can be quickly connected and separated. It is often used for the connection of two simple electrical components. The connector connected by a buckle will mark the correct locking direction of the buckle at the buckle. The user can observe whether the buckle is installed in the small hole on the side of the connector nut.

Splitter waterproof connector technical parameters

Splitter waterproof connector product structure