2~8P waterproof connector Round plug

2~8P Waterproof Connector Round plug

Waterproof connectors and waterproof sockets should be installed and used with the following points in mind.

i. Waterproof connectors and waterproof sockets should be mounted on insulated panels, insulated boxes or electrical panels and logs. Usually install the two holes of the socket parallel to each other on the flat surface of the building.  

ii. When installing a three-hole socket, install a grounding hole (large hole) at the top and the grounding terminal must be connected to the earth wire; the zero wire should not be used as an earth wire.  M8 Series Circular Connectors

Third, the phase wire should be connected to the specified terminal (marked with the letter "L"). The 220v power supply entering the socket is generally "left zero, right phase". The two-hole and three-hole sockets are combined sockets, mostly used as mobile sockets. It is similar in construction and installation to the two- and three-hole sockets.  

Remember that the rated current of the waterproof connector and socket must be greater than the current of the connected appliance, and the current of the appliance must not exceed the current of the socket.

Fifth, the use of mobile phone plugs to keep clean, pay attention to moisture, so as not to damage the insulation caused by leakage or short circuit.  Industrial I/O Connectors

Six, some single-phase three-core plugs, sockets or three-phase four-core plugs and sockets in the wiring must be grounded to the terminals with grounding symbols, and the metal shell of the electrical appliances connected to ensure electrical safety.  

Seven, when wiring must ensure that the socket and plug contact solid. The binding posts next to them must be checked intact and must not have burrs. They should be kept at a certain distance from each other to avoid short circuits.

Product properties