M16 DP-01 Nylon nut Waterproof connector

M16 DP-01 Nylon nut Waterproof Connector

The four basic structural components of the vehicle waterproof connector are described in detail as follows:

1. Contact parts are the core parts used to complete the power connection function. Generally, positive and negative contact parts are used to form contact docking, and electrical connection is completed through the plug action of two contact parts with different parameters. The positive represents rigidity and its specific shape can be divided into cylinder, square column and flat, etc. The material of production and manufacturing is made of brass or bronze. Negative is on behalf of the more critical parts of the jack, it should be based on the elastic structure and rigid insertion deformation and strength and rigid contact parts to form a close connection.

2. The shell of the waterproof Circular Connector is the outer cover part, which is provided with an insulation installation module and a mechanical protection device, which can make the Waterproof Plug and socket successfully complete the accurate docking so that the connector is fixed to the use of equipment.

3, the insulation parts is the bottom base or the installation plate, its role is to make the contact parts in accordance with the specified position and spacing, and to ensure that the insulation performance between the contact parts and between the shell at all times to maintain good, because good insulation resistance and voltage resistance is the basic technical requirements in the use of insulation materials.

4, other accessories are on behalf of the Circular Waterproof Connector structure inside many small piecework components, such as screws, nuts, sealing rings, positioning pins, connecting rings and spring rings and so on standard universal parts.

Waterproof connector technical parameters

Material number	HT-M16DP-01-2P	HT-M16DP-01-3P	HT-M16DP-01-4P	HT-M16DP-01-5P	HT-M16DP-01-6P
Number of cores	2 pole	3 pole	4 pole	5 pole	6 pole
Current rating	≤10A	≤10A	<8A	≤8A+4A	≤8A+4A
Wire Matching	≤1.5m㎡	≤1.5m㎡	≤1.5m㎡	≤1.0m㎡	≤1.0m㎡
Voltage rating	250V
Insulation resistance	≥100MΩ
Contact resistance	≤10mΩ
Number of insertion and extraction	1000 times
Ambient temperature	-40℃ ～+105℃
Material of screw cap	Modified engineering nylon
Terminal material	Copper plated
Material of outer mould	Modified engineering nylon
Waterproof rating	IP68
Compliance with standards	EN61984/UL2238
Hardware arrangement

Waterproof plug Connection method

Circular Waterproof connector linking method