M12 5-core Male Head Waterproof Connector Front Lock

M12 5-core Male Head Waterproof Connector Front Lock

Waterproof connector production process on the enhancement of its waterproof performance, then the round waterproof connector processing process and what will be the difference? Just follow our Huatao electronic engineers to take a look at it.

　　As the waterproof Circular Connector processing process is not the same, so we are here to introduce one of the waterproof connector processing process. Specifically from the structural characteristics of waterproof connectors, waterproof connector parts processing, waterproof connector assembly method of these three aspects are introduced::

　　1. Waterproof Plug connector structural characteristics

　　Including integrated Pin pin circuit board, the back end of the circuit board has more than one replaceable plug-in, plug-in are set up with Pin pins, the Pin pins into the circuit board and Pin pin conductive connection, Pin pin and Pin pin are soldered and dotted glue, in the circuit board and the female chassis of the external molding film and outer film, and in the size of the inner film and outer film set of an iron shell outside the composition A complete waterproof connector.

　　2. Processing of waterproof connector parts

　　The inner and outer membranes are moulded directly onto the circuit board and form a waterproof seal. The inner and outer membranes are moulded onto a silicone ring or a soft material, which is either mounted on the circuit board or moulded on the outside of the circuit board to form a waterproof seal. The inner and outer membranes are moulded on the board several times to achieve the connector dimensions required by the connector specification. The iron shell is moulded directly onto the outer mould or into the plastic housing of the connector by means of injection moulding.

　　3. Assembly of waterproof connectors

　　The connector is assembled by integrating the Pin pins into the circuit board and assembling and soldering the Pin pins at the back of the board in a two-part assembly. Then through multiple injection moulding the structure of the connector is set to shape and will correspond to the connector shell mounted, due to the structure and the special relationship of the process, you can enhance the interface of the electronic product connector waterproof level, to achieve better waterproof effect.

　　Of course, the processing of waterproof connectors is far more than a process, with the development of society, the level of technology, there will be more and more high-quality technology. On the waterproof connector processing process is briefly introduced here, we hope that our Huatao electronic engineers share to deepen your understanding of the waterproof connector processing process.

　　As a professional waterproof manufacturer with many years of experience, Huatao Electronics has a strict pursuit in the production of waterproof connectors. In order to improve the waterproof performance, Huatao Electronics from design to production of each link are strictly enforced international standards to achieve waterproof connectors waterproof performance while also meeting international environmental requirements. The modern, well-equipped factory also ensures that production is fast and can be produced as soon as the order is placed, eliminating long waiting times.

Product properties